What is HT Pipe Making Machine？
Over the past 30 years, more than 400 global customers with carbon filter production lines have chosen HT pipe-making machines to produce carbon filter shells.
By owning this machine, your enterprise gains the ability to produce casings independently, which means you have successfully integrated the entire production process from filter cartridge production to packaging.
Manufacturing the shell with the HT pipe making machine is a critical step before obtaining the final product. As we all know, granular carbon filters such as GAC/UDF filters require intact shells and end-caps to prevent carbon granule leakage; therefore, HT pipe making machines can perfectly achieve this.
If you are a manufacturer specializing in the production of carbon filter cartridges, then you will need the HT pipe-making machine to complete the filter sealing process. Contact us immediately for full information about this machine, and we will help you obtain products with consistent and reliable sealing performance.
Why Choose HT Pipe Making Machine ?
HT pipe-making machine realizes a highly automated assembly-line operation, from loading, extrusion, and cooling to cutting, controlled by a PLC system. It can help you significantly save production time, as you only need a worker to set parameters and conduct monitoring.
HT pipe-making machine enables your entire production line to achieve 24-hour continuous, uninterrupted production. Depending on product specifications (10- 40 inches), our daily production capacity ranges from 800 to40,000 units, enabling you to easily meet large-scale production demands.
HT pipe-making machine is equipped with a precise temperature, extrusion, and cutting control system, which ensures that your product exhibits excellent performance in key indicators such as dimensional accuracy, wall thickness uniformity, and sealing performance. You can also freely choose plastic materials such as PP and PE according to your needs.
For granular carbon, the HT pipe-making machine is not only responsible for producing the shell but also for processing it into a standardized, independent component. This improves the independence of the filter element and facilitates installation and replacement.
Highly Automated Design
Our HT pipe making machine features a highly automated design that reduces reliance on manual labor.The continuous production mode also reduces waste and rework, resulting in a higher utilization rate of raw materials.When you need to produce pipes of different specifications, you don’t need to purchase multiple specialized equipment, just replace the mold. Most importantly, Our HT pipe making machine uses a low-power design of 34kW (actual operating power is even lower), enabling you to keep high production efficiency while cutting costs to the best level.
Reduce Intermediate Costs
Owning an HT pipe making machine means you can completely eliminate your dependence on shell manufacturers, shorten both raw material procurement time and production cycles, and reduce losses in your production processes, which significantly improves your product delivery capabilities.
In addition, self-produced filter shells can avoid additional costs brought by external suppliers and eliminate unexpected price fluctuations from third-party suppliers, allowing you to plan your production budget more accurately and stably.
This end-to-end integrated production model effectively reduces all unnecessary intermediate expenses, helping you comprehensively compress and control overall costs, and gain a dominant position in market competition.
More About HT Pipe Making Machine
- Equipment Parameter Table
| Key Specs | HT pipe making machine |
| Production capacity | 0.6-0.8m/minute |
| Rated Power | 34KW/set |
| Running power | 20kwh per hour when machine is running. |
| Raw material | PP /PE |
| Outer Diameter | Mostly 2.5inch,4.5inch. If you wanna make different diameter. We can customize. |
| Length | 10”20”30”40” |
| Weight | 3.5t |
| Dimension | 18m³ |
| Layout | Whole production line:(1.5m*13.5m) Minimum require 30 square meter |
Completely unnecessary. Our machine adopts a PLC intelligent control system, and all parameters (temperature, speed, cutting length) can be set and automatically executed by the system. Ordinary operators can work independently after 1-2 days of training.
We only need to replace the fixed-length mold of the cutting machine to complete the specification switch, and the entire mold replacement process takes about 10 to 15 minutes. After changing the mold, no complex debugging is required, and there is no need to worry about wasting a lot of time on specification changeover.
Our company can provide supporting machines, such as capping machines, to form a full-process assembly line. This machine can also be operated independently in the short term when you have a limited budget, in which case manual labor can be used temporarily for the carbon filling or capping processes.
